I have the same problem but turn on and off still the same error
↧
Re: Xerox WorkCentre 3215/NI Scan Error
↧
Re: Scanning with Versalink C405
Thanks for your help, but I'm still getting the same error.
I've downloaded the User and Admin guides but they arne't much help.
Do you know a good, easy to read, guide for setting the Versalink up, as I may of missed something else?
Thanks
Lee
↧
↧
Re: Scanning with Versalink C405
Sorry, I have nothing more, if DNS is setup and correct, it certainly should not be stating that it isn't set up, and I have never come across any device that had a bug like that.
If you are setting up GMAIL and the primary DNS is set as 8.8.8.8 then the only way(s) for it to fail is if
1. The gateway is wrong so it can't get to 8.8.8.8
2. Proxy/Firewall
As for setup, with exception to the SMTP server, all the big ones are pretty near identical. So GMAIL is exactly the following
The only change for Office 365 is changing the SMTP server from smtp.gmail.com to smtp.office365.com and of course an email from that service to use. But STARTTLS, port 587 is the defacto standard at this point.
There is a bug in older firmware where Office365 could fail unless you disabled IPv6 (see below), so if you are not on a spar firmware, you may want to update it, or try this:
And change Dual Stack to IPv4
↧
Xerox Workcentre 3655i Fax Forward to Email - Fax Sender Information
Is there a way to retrieve the fax sender information so that you know who sent the fax rather than it putting our email address in the sender line and "Fax" in the subject line.
↧
Re: 6015 Network Scan give SMB Error 031-529 Login Failed
I’m trying to scan to a shared folder on my Win 10 PC and I keep getting the 031-529 error on my printer. My PC is connected to my Printer through a network. I have some questions:
1) Should the Login Name be my username or an email. I don’t have an email linked to my user profile
2) Which port number should I use
3) How do I turn on SMB1
4) How should the format of “Name of Shared Directory” look like
5) How should the format of “Subdurectory Path” look like
6) On the “Share Permissions” for my shared folder, it shows only “Everyone”. Should I add anything
7) For permissions for Everyone, only “Read” is checked. “Full Control” & “Change” is unchecked. Should I change anything here
1) Should the Login Name be my username or an email. I don’t have an email linked to my user profile
2) Which port number should I use
3) How do I turn on SMB1
4) How should the format of “Name of Shared Directory” look like
5) How should the format of “Subdurectory Path” look like
6) On the “Share Permissions” for my shared folder, it shows only “Everyone”. Should I add anything
7) For permissions for Everyone, only “Read” is checked. “Full Control” & “Change” is unchecked. Should I change anything here
↧
↧
Re: 6015 Network Scan give SMB Error 031-529 Login Failed
All 7 questions are answered in the thread here, just read it.
↧
Re: xerox workcentre 3225 - scanning via Wifi Direct
You are probably going to need to ask Xerox Engineering (Call them for support)
I looked everywhere and can't find what Apple Airprint specification is used on any printer Xerox makes or any other company, mostly because I can't find out what Specifications there are from Apple.
↧
Versant 80 scanning issue
Hello,
I have a problem with my Versant 80.
The "scan to PC function doesn't work". It's very strange because in the printer web interface I go to the "Properties/Network Scanning" and when I click to any option says:
Internal Server Error
An error has occurred at server when processing request.
So I can't configure and change any data for the scanning configuration
Thank you and sorry for my english
↧
Re: Versant 80 scanning issue
Right-click in the unloaded part and choose to refresh.
The issue is usually related to a delay in response caused by the Fiery being between you and the printer.
I assume you have already re-booted them though (Both, do not assume rebooting the copier actually rebooted the Fiery)
↧
↧
Xerox 5335 - Error 027-529
I have a Xerox 5335 - and it usually scans fine. But for the last few months, it has been acting up. It will scan fine for a few hours and then abruptly stop. I receive error 027-529 and the dreaded tones of death.
I have looked up solutions online, but none seem germane.
Currently, I am rebooting the server computer and the printer, and that fixes it for a few hours.
What do I do so I don't have to continue to do this.
↧
Re: Xerox 5335 - Error 027-529
↧
Re: Xerox 5335 - Error 027-529
The failure is because there are too many simultaneous connections to the share, it would only happen if you do many scans in a short period of time to the share. The max concurrent logins to a share is 20 in Windows.
So you can try maxing the connections to 20 on the share, or switch to FTP that does not have the issue as seen here in SMB.
↧
Looking for CentreWareWebEnglish for a PE120 MFP
Not finding it on website. Plz advise
↧
↧
Re: Looking for CentreWareWebEnglish for a PE120 MFP
Centreware web is not designed for any single device, that would defeat the purpose of it.
↧
Xerox AltaLink C8045 Scan to Function
Good Day,
I am having trouble configuring the scan to destination function of a new Xerox AltaLink C8045, the goal is to allow a user to scan to a network folder VIA SMB.
I already have to device configured with the Kerberos Server for users to log into, and I have created an entry in the address book for the "Scan to feature". When I test destination from the web interface all sections pass and I can see that a file is made and deleted on my shared drive by looking at the date las modified time.
The issue is when I try the function from the physical device, I am presented with the following error: Conflicting Job Settings - Invalid path Specified. Any idea what my problem is and why the destination test works from the Web interface but the function of the machine fails?
↧
Re: Xerox AltaLink C8045 Scan to Function
It's a bug in the firmware, just update it
↧
Re: Xerox WorkCentre 3215/NI Scan Error
I have the same problem but turn on and off still the same error
↧
↧
Re: Scanning with Versalink C405
Thanks for your help, but I'm still getting the same error.
I've downloaded the User and Admin guides but they arne't much help.
Do you know a good, easy to read, guide for setting the Versalink up, as I may of missed something else?
Thanks
Lee
↧
Re: Scanning with Versalink C405
Sorry, I have nothing more, if DNS is setup and correct, it certainly should not be stating that it isn't set up, and I have never come across any device that had a bug like that.
If you are setting up GMAIL and the primary DNS is set as 8.8.8.8 then the only way(s) for it to fail is if
1. The gateway is wrong so it can't get to 8.8.8.8
2. Proxy/Firewall
As for setup, with exception to the SMTP server, all the big ones are pretty near identical. So GMAIL is exactly the following
The only change for Office 365 is changing the SMTP server from smtp.gmail.com to smtp.office365.com and of course an email from that service to use. But STARTTLS, port 587 is the defacto standard at this point.
There is a bug in older firmware where Office365 could fail unless you disabled IPv6 (see below), so if you are not on a spar firmware, you may want to update it, or try this:
And change Dual Stack to IPv4
↧
Xerox Workcentre 3655i Fax Forward to Email - Fax Sender Information
Is there a way to retrieve the fax sender information so that you know who sent the fax rather than it putting our email address in the sender line and "Fax" in the subject line.
↧