Scanning function Workcentre 7855
Good morning All, I am trying to scan documents to a location in my computer. The problem I am facing at the moment is that I do not know how to divide up the documents into pairs when I scan them....
View ArticleRe: WC3210 scanner problem on OpenSUSE
Hi Murmunlok,Thank you for using the Support Forum. Please take a look at the following information from the user manual troubleshooting section for Linux. Check if the scanner driver for your machine...
View ArticleUnable to scan to Windows Server 2012 R2
Hello, We purchased a Xerox ColorQube 8700S about a year and a half ago. We deployed a file server about 10 months ago and have been desperately trying to get the Workflow Scanning to work. Every time...
View ArticleRe: Unable to scan to Windows Server 2012 R2
I hear the new SPAR 072.162.145.05000 works with 2012r2give it a tryhttp://www.support.xerox.com/support/colorqube-8700/file-download/enus.html?contentId=128186
View ArticleRe: Phaser 3635 scanning in windows 8
not sure if it will with smb because of the smb3 in windows 8 but if you use FTP it will work
View ArticleRe: Workcentre 7545 Scan to email - Scan In Progress...
the newer firmwares have been having issues with that from what ive seen in the field.but yes it can be rolled back. PM me for more info
View ArticleRe: Phaser 3635 - Can't scan via SMB on Windows 8.1 ("Job failed due to...
port 445 not 139 I havnt tried a 3635 on windows 8 yet so i wont promise it will work. FTP is a good way to get around Windows 8 SMB v3
View ArticleRe: WC3210 scanner problem on OpenSUSE
I was able to install the scanner via the usb cable, as a local scanner. But, unfortunately, there is no way of installing the scanner as a network scanner, and sadly, this function is available under...
View ArticleRe: Phaser 6110MFP - Network scan on Windows 7 Home 64bit
Hello Kimzi, I have the same problem. I followed the steps below, but when I am opening the stored file manager 3, I always get the message "unable to connect to the specified scanner". I am using win...
View ArticleRe: Unable to scan to Windows Server 2012 R2
Unfortunately, the link you provided is for SPAR 072.161.145.05000. We currently have 072.162.004.09100 installed. The version you provided is a tad bit older. Any other ideas?
View ArticleRe: Unable to scan to Windows Server 2012 R2
Well.. scratch my previous. I went ahead and installed the update and it rolled the System Software Version back, but the Network Controller, User Interface, etc. was updated. Once the machine...
View ArticleRe: Why Network Scan Utility do not working with Xerox 3550?
Hi LukinGV,Thank you for using the Support Forum. Please take a look at the instructions for installing the Xerox Scan Utility, make sure you have followed the instructions. If that does not help...
View ArticleRe: Phaser 3635 - Can't scan via SMB on Windows 8.1 ("Job failed due to...
Hello Kimzi, Yes I tried WORKGROUP/XeroxScans where "WORKGROUP" is my domain with no luck. Software version is 20.105.01.010 Thanks,LG
View ArticleRe: Phaser 3635 - Can't scan via SMB on Windows 8.1 ("Job failed due to...
Hello Mike, I tried changing the port to 445 but still got the file access denied error. I then attempted to tried to go the FTP route as you suggested but spent nearly an hour trying to setup an FTP...
View ArticleRe: Phaser 3635 - Can't scan via SMB on Windows 8.1 ("Job failed due to...
Ok I finally got the ftp site to work on the client with Windows 8.1. I setup the parameters in the 3635 with the IP address of teh client and in the document path all I entered was the name of the...
View ArticleRe: Xerox 7120
I have a wc7120 that has an unusual problem. When you make a copy off the glass of a 8.5x14 or 11x17 you get a severe rainbow effect at the bottom right corner of the copy. If you copy from the DADF...
View Article7120 copy/scanning issue off the glass
I have a wc7120 that has an unusual problem. When you make a copy off the glass of a 8.5x14 or 11x17 you get a severe rainbow effect at the bottom right corner of the copy. If you copy from the DADF...
View ArticleRe: Scanning function Workcentre 7855
Hi Mandany,Thank you for using the Support Forum. Please take a look at the instructions for selecting the scan settings or for modifying a template. You should be able to select double sided and PDF...
View ArticleXerox 4260 copying pick up tray
When we run copy on our 4260 it will only pick up from the bypass tray so we have to leave that tray with paper in it. If we close the bypass tray, the copier will not pick up from the regular default...
View ArticleScanning to email - WorkCentre 5875 not adding "from" and "to" login name
Good Afternoon,My employer recently purchased a Work Centre 5875. I have it setup on our network wit the correct LDAP and Kerberos settings but whenever one of the employees here logs in to the unit...
View Article