Re: Scanning via SMB and E-Mail
Thank you for your prompt reply Joe.I changed my username. However, if I put a contact I get the error message that the username or password are wrong.
View ArticleRe: Scanning via SMB and E-Mail
A login failure tends to be a login failure assuming you are on current firmware, which is in the link I provided
View ArticleRe: ColorQube 8900 firmware update loop
Hello,So I tried to return FW 071.160.202.26500, but I do not know if I did the right process, I created a flash drive with a fat32 partition (default) I created a folder called ALTBOOT and put the FW...
View ArticleRe: Scanning via SMB and E-Mail
E-Mail works now. But I don't know why because i haven't done anything.
View ArticleRe: Scanning via SMB and E-Mail
It is the firmware a .bin file? I can not install it on the Mac. I now download the upgrade utilities for mac from the Xerox homepage. Is that correct?
View ArticleRe: A couple of questions before buying!!!!
Everything does FTP, nothing does AFP.The 3225 doesn 't support SMBv2, only SMBv1, so I would not consdider it viable now. (The 3335/3345 does)I don't believe the 3225 does scan direct to a USB stick
View ArticleRe: Scanning via SMB and E-Mail
How long should the update take?The tool says it's done, but the printer still gives the following message:"An authorized user makes changes to this device, please wait ..."For 10 minutes.
View ArticleRe: ColorQube 8900 firmware update loop
Hi,In the AltBoot folder (named like this with A and B in upercase) put a file named FORCED_UPGRADE (all in upercase). Gabi
View ArticleRe: ColorQube 8900 firmware update loop
Hi,even though it did not work .. it's the same looping process.
View ArticleRe: DocuMate 3220 No TWAIN after Installation, WIA does't see scanner.
I have this issue sometimes. With the scanner's power cord unplugged, hold down the power button on the scanner. Now plug the power cord back in. Wait until the power button LED turns blue. Continue...
View ArticleBrowse Network to Choose Scan destination Altalink C8030
I'm looking for a way to browse a scan target on the local network via SMB. I can set many static scan destinations but cannot find a way to browse through my LAN to dynamically select a folder as a...
View ArticleRe: AltaLink C8045 Fax Problem
I realize this is an older post, but I am looking for a solution to that same issue. I have 2 of the Altalink C8055 in our office. I am have the same issue. It is not unusual for staff to send 30 to 50...
View ArticleRe: ColorQube 8900 firmware update loop
Hello, I did several tests and got the solution. I used a Kingston pendrive it worked out, probably the printer will not some pendrive.I had some incompatibility with fw but I tested all I could and...
View ArticleRe: Browse Network to Choose Scan destination Altalink C8030
It has only been possible to do on FujiXerox printers, there has never been a Xerox made printer with that feature.But.. It is expected to be available in the future (firmware update/refresh), No ETA...
View ArticleRe: ColorQube 8900 firmware update loop
Carlos,Thank you for reminding me about incompatible USB drives. In the past I had the same issue and changing USB drives worked. Hopefully I will remember this time ;-)
View ArticleRe: VersaLink B405 ADF Scan more than 60 sheets or pages to PDF (build job...
I have a VersaLink C7025 and if I start the work from DADF I can not get it from the plate.
View ArticleRe: VersaLink B405 ADF Scan more than 60 sheets or pages to PDF (build job...
You are quite right.You can use the preview option to scan more than 60 sheets, but it seems it must be the same size and orientation etc, and you cannot mix in pages scanned from the platen.The build...
View ArticleRe: 8560mfp Scanner Head Belt
Hello,same issue here, the scanner drive belt is broken. There are several similar looking makes on the web for different OEMs and models. Is there anyone knowing a replpacement or at least the correct...
View ArticleRe: Scan to Email SMTP Error
Sorry for the delayed response, I appreciate the reply, Joe. Hopefully it didn't appear that I was insinuating that the machine started changing its own settings. Bottom line, there are a few people...
View ArticlePrinter won't wake up
We have a stand-alone WorkCentre 3225 copier/fax. It has gone into 'sleep mode' and we are having trouble getting it to 'wake up'. You can press any buttons to print, fax, to simply try to get it...
View Article