Re: Scanning to Destination Workcentre 7225
have you setup the dns correct? i think you might need a newer firmware though but to test quickly, jys change the hostname to IP instead , on your repository setup on the machine
View Articleversalink / altalink scan repository
hi started playing with the versalink machinesbut i am unable to find a scan repository setup where you can define an SMB or FTP, like on connectkey so you can make templates based on that repository...
View ArticleClik here to view.
Re: versalink / altalink scan repository
Ah, interface will be different then also?Good to hear ;)
View ArticleClik here to view.
Re: versalink / altalink scan repository
Yes, while the basic menu is the same/similar, they are far from identical one you get past the outer layer.For instance, this is the VersaLink view of the exact menu (EWS > Properties >...
View ArticleRe: WC7970 Workflow scanner setup - getting login failure
I followed your instructions and it worked. Thank you for your help.
View ArticleWC 3335 Default FAX output tray
Is it possible to force FAXes to output from a specific tray on the WorkCenter 3335? Thanks.
View ArticleVersalink b405 scanning problem
I am unable to access the scanner on my Versalink B405. The printer is connected directly to the Windows 7 by USB. I am able to print with no problem,but the scanner software does not seem to install...
View ArticleRe: Versalink b405 scanning problem
Pretty sure Scan is a Network or USB drive only feature, Scan via USB is not listed, Scan to USB is just scan to a USB drive.
View ArticleClik here to view.
Workcentre 7545 Scanning - Login Error after Firmware Update
Hello, My machine (Workcentre 7545) was running fine, but I noticed that there was a new Firmware update (Feb 2017 file). I recently upgraded the firmware, and after the update, my scan to folder has...
View ArticleClik here to view.
7970 - Workflow Scanning - Missing "File Format" option
Is there a setting/option to allow users to access the "File Format", mentioned in the user guide (p.143), option in the screen below to change a scan to "Searchable" or "Image Only?"
View ArticleClik here to view.
Re: 7970 - Workflow Scanning - Missing "File Format" option
User guide is likely showing old info from the previous interface. Anything current would be like this.
View ArticleClik here to view.
Re: Workcentre 7545 Scanning - Login Error after Firmware Update
Machine got SMB2-3 ability and now needs full credentials to work. To get them do this (Use the name as seen in the brackets, if it isn't there, add it, do not rely on "Everyone"):
View ArticleRe: Workcentre 7545 Scanning - Login Error after Firmware Update
I just changed the IP address to the server IP address. Before, it was set to the printer IP address.
View ArticleRe: Workcentre 7545 Scanning - Login Error after Firmware Update
Then the firmware update played no part in it, There is no way it could have glitched a setting to a valid, but not correct IP on the LAN
View ArticleClik here to view.
Re: 7830i poor quality when copying
Thank you very much!The following settings are much closer to the original. Regards
View ArticleMaximum number of users in Public Address Book
Hello, We have a Xerox Workcentre 7556. We use an LDAP address book for the system wide network to scan items to email. I am trying to set up a public address book to be stored on the device itself so...
View ArticleRe: WC 3335 Default FAX output tray
Hi Digital Man,Thank you for using the Support Forum. Please take a look at the solution for setting the Fax output defaults. Pay particular attention to step 9 for programming the Fax Receive Tray....
View ArticleWorkcentre 6605 - won't auto-feed to scan
I have a new workcentre 6605DN and scanning to PC. I load 4 pages in auto-feed tray and hit start, the scan starts as if a single page is loaded on the screen, won't auto-feed the documents? I tested...
View ArticleRe: Workcentre 6605 - won't auto-feed to scan
Please disregard...I found that there is a setting at Start Scan to choose either Flatbed tray or Feeder tray. Problem solved.
View Article